HT9661 bonding silicone for LED light shield
HT9661 High Performance RTV Silicone Sealant
FEATURES
9661 high performance RTV-1 silicone adhesive/ sealant, designed for applications where non corrosive cure and durable adhesion to a variety of substrates is required.
- One component adhesive/ sealant
- Cures at room temperature when exposed to moisture in the air
- Alkoxy cure system
- Non sag, paste consistency
- Good adhesion
- Excellent dielectric properties
- Stable and flexible form -60℃ to +200℃
● Properties before curing
| Item | Typical Value | Range |
| Color | White | |
| Component of Basic Materials | Polysiloxane | |
| Density g/cm3 | 1.4 | 1.39~1.42 |
| Tack Free Time (25℃,50%RH)min | 10 | 5~15 |
| Extrusion (25℃,0.5Mpa, ￠3mm) g/15s | 15 | 7~20 |
● Properties after curing
| Item | Typical Value | Range |
| Curing Type | Dealcoholization | |
| Hardness Shore A | 40 | 40±5 |
| Tensile Strength Mpa | 2.2 | 2.0~2.5 |
| Elongation at break( %) | 450 | 350~500 |
| Shear Strength(Mpa) | 1.8 | 1.5~2.3 |
| Volume Resistivity (Ω*cm) | 1.0×1015 | ≥1.0×1015 |
| Dielectric Strength KV/mm | 18 | 16~22 |
| Work Temperature(℃) | | -60~230 |
| Flame retardant rating | UL94 HB | |
STORAGE
When stored at 8-28℃ in the original unopened containers, Except for the 9661W5 (its shelf time is 6 months), 9661 series have a usable life of 9 months from the date of production.
Special precautions must be taken to prevent moisture from contacting this material.
Containers should be kept tightly close.
APPLICATIONS
- Sealing and bonding applications where non-corrosive cure is required.
- Designed for outdoor conditions.
- Applicable to adhesive/seal of PV module, automobile lampshade, lighting lamp.
HOW TO USE
- Surface preparation. For best adhesion, the substrate surface should be clean and dry prior to application. Some solvents can be used to clean the surface.
- How to apply. Squeezing gel to the clean surface.
- Curing. 9661 is cured at room temperature by reaction with moisture in the air. Curing process takes place from the outside to the inside .A 2~4mm thick coating will be take place until 24 hours after coating (25℃,55%RH). PACKING STANDARD
9661W, White
9661W4, 310 ml/cartridge, 25 cartridges/box
9661W5, 2600ml/ cartridge, 4 cartridges/box
9661W8, 20 kg/barrel, 2 barrels/set
9661W9, 230kg/barrel, 2 barrel/set
9661B, Black
9661B4, 310 ml/cartridge, 25 cartridges/box
9661B8, 20 kg/barrel, 2 barrels/set
9661B9, 230kg/barrel, 2 barrel/set
9661G, Gray
9661G4, 310 ml/cartridge, 25 cartridges/box
9661G8, 20 kg/barrel, 2 barrels/set
9661G9, 230kg/barrel, 2 barrel/set
Product Tags:
|
|
White Color HT9661 Silicone Electrical Potting Compound for LED light shield Images
|
